ODM®

DLS 350

Handheld Dual LED Light Source

Category: Optical Light Sources
Part No: DLS 350

DLS 350 Handheld Dual LED Light Source

Overview

The DLS 350 dual LED source allows stabilized power levels for accurate loss measurements on multi mode systems. Technicians can utilize each of the wavelengths included in this light source to reference and test with RP 4XX series optical power meters and gather measurements to meet international standards.

The DLS 350 provides a 2 kHz tone output which is recognized by the RP 4XX series power meters; the incoming 2 kHz signal is identified and an audible alert is provided by the power meter. This 2kHz signal will also allow fiber identification when used with non-invasive fiber identifier devices, such as the LFI 110.

The dual LED source comes with a female SC adapter to allow connection to test jumpers and fiber under test. Easy removal of the adapter means that the light source ferrule can be cleaned to prevent contamination of test jumpers. Additional adapters are available.

  • 850 nm & 1300 nm Wavelengths
  • NIST Traceable Measurements
  • 2 kHz Tone Output
  • Universal Connector Interface Compatible with SC, FC, ST, & LC
  • Long Battery Life

Specifications

Wavelengths850 nm, 1300 nm
Optical InterfaceUniversal Connector (SC / FC / ST / LC)
Tone Identification2 kHz Incoming Signal - Audible Alert
Power OnPush Button ON / Auto-Off
Output Power-22 dBm
Output Stability± 0.05 dB (1 Hour), ± 0.03 dB Long-Term (15 min. Warm-Up)
Spectral Width40 nm / 120 nm
Battery TypeCR2
Operating Temperature-10° to +50° C
Storage Temperature-30° to +60° C

Tool Case IncludedYes
Dimensions6.1″ x 0.94″ x 0.75″ (15.5 x 2.38 x 1.9 cm)
Weight3.0 oz (85.4 g)